Community D5 Ceiling Loudspeaker Single NEW

£100.00 + VAT

Community D5 Ceiling Loudspeaker Single NEW

The D5 has a more focused dispersion, higher sensitivity and output than the smaller D4. The high performance D5 is a true coaxial loudspeaker with a real compression driver concentrically arranged so that the upper frequencies emerge through the center of the low-frequency driver’s magnetic structure and cone via a precisely tapered Tru-Phase™ high-frequency waveguide. This special construction provides consistent, wide dispersion up to 16 kHz, all but eliminating high-frequency narrowing. Further pattern improvement is achieved by precisely mounting the low frequency driver (and its concentric HF driver) centered in the baffle, as contrasted to the offset designs used by others.

Specification

Loudspeaker Type 2-way, full-range, coaxial loudspeaker
Operating Range 80 Hz / 20 kHz (+/- 5 dB)
Max Input Ratings (8 ohm)
100 W continuous, 150 W program
Wattage Tap Selections 60 / 30 / 15 watts @ 100 V
60 / 30 / 15 / 7.5 watts @ 70 V
Sensitivity 1W/1m 93 dB
Maximum Output 113 dB SPL / 119 dB SPL (peak 8 ohm)
Nominal Impedance 8 Ohms
Nominal Dispersion
115º conical (1 kHz to 6 kHz)
130º conical (500 Hz to 6 kHz)

Crossover Frequency 1.6 kHz
Recommended Signal Processing 65 Hz high pass filter
Drivers LF 1 x 5″
HF 1 x 1″exit compression driver
Driver Protection Self resetting solid state breaker
Input Connection Removable Phoenix terminal block
Controls Front face tapping selector
Enclosure Zinc plated steel back can, ABS baffle
Finish White grille and baffle
Mounting / Rigging Provisions 3 steel mounting clamps
Grille White powder coated steel
Supplied Accessories C-ring supporting plate
Tile support bridge rails
Grille
Paint mask
Cut-out template
Flat screwdriver
Optional Accessories D5-FAR Face Adapter Ring
D5-CATR Can Adapter / Trim Ring
D5-NCB New Construction Bracket
Hole Cutter – Canford – Part No. 55-688
Hole Cutter – Toolstation – Part No. 84341
Dimensions Depth: 174 mm (6.83″)
Diameter: 242 mm (9.53″)
Cutout: 222 mm (8.75″)
Weight 4.7 kg (10.4 lbs)

In stock