2 x Klark Teknik DN8000 2 in 5 out Digital Crossover Loudspeaker Processor

£125.00 + VAT

This listing is for 2 Klark Teknik DN8000’s , unit 1 does not power up, we’ve checked the fuse in the IEC inlet and thats ok so it’s definitely faulty – Suitable for spares or repair – Possibly the internal fuse or mains transformer
Unit 2 powers up fine but the screen says it needs a service on boot up and the internal battery is Low, the “Enter” button also has issues – This should be an easy fix

As 1 unit is dead and the other needs work These are being sold as spares or repair – No warranty No returns

The DN8000 is a two input, five output digital crossover. Being a box of DSP, it has the potential to fulfil not only the normal tasks thought of as applicable to a crossover, (i.e. frequency splitting) but many others. This allows it to replace much of, if not all of, the additional outboard processing that has come to be associated with complete multi-driver speaker system alignment and protection. The unit is completely configurable from the front panel, and included in the signal path for each input to output are the following modules. These modules are fixed in terms of their position in the path – their order has been optimised for the intended application as a crossover.

A delay module – this allows delays to be set for eachoutput, and master delays to be applied to each input. The units are selectable, and temperature compensation may be added.
A fully configurable routing module – this allows any output to be fed from either input, both inputs or neither input.
A high pass filter module – this has fully variable frequency adjustment, and a selection of roll-off (slope) and filter type combinations.
A low pass filter module – this has fully variable frequency adjustment, and a selection of roll-off (slope) and filter type combinations. Two parametric equaliser modules – these both feature fully adjustable frequency, ‘Q’, and level, and can be placed anywhere on the frequency scale.
A ‘Low EQ’ filter module – this has variable frequency adjustment, and a selection either parametric mode or shelf mode, and level adjustment.
A ‘High EQ’ filter module – this has variable frequency adjustment, and a selection either parametric mode or shelf mode, and level adjustment.

 

 

Out of stock