4 x d&b Audiotechnik E9 Loudpeakers & P1200 Power Amplifier all Flightcased
£3,125.00 + VAT
Selling as a complete package – 4 x d&b Audiotechnik E9 loudspeakers in 2 wheeled flight cases and a flightcased P1200A amplifier, everything is in very good condition, it is all in perfect working order & has been well looked after.
This can be shipped via a Pallet service – message me your address and I’ll get you a price for delivery.
The E9 is a medium sized 2-way bass-reflex loudspeaker system with a full, warm bass and crystal clear highs. Having a frequency response down to 50 Hz, the E9 is a full range cabinet that can be used without subwoofers in many applications and, by placing the cabinet on its angled side panel, it can also be used as a stage monitor. The asymmetry of the HF horn means that the E9 has a vertical coverage pattern with a downward tilt, 20° above and 30° below the cabinet axis, providing quick and easy coverage of near field listening areas. The E9 cabinet is constructed from marine plywood with an impact resistant paint finish, steel handle plates on the top and bottom each with four M10 threaded inserts, and on the bottom a socket to accept a loudspeaker stand.
|Max. sound pressure (1m, free field)1 with D12/E-PAC||129/126 dB SPL|
|Power handling capacity (RMS/peak 10 ms)||200/800 W|
|Frequency response (-5 dB)||50 Hz – 17 kHz|
|Nominal dispersion angle (h x v)||90° x 50° (+20°/-30°) CD|
|Cabinets/E-PAC||1 (22 )|
|Dimensions mm (H x W x D)||592 x 364 x 318|
|Dimensions inch (H x W x D)||23.3 x 14.3 x 12.5|
The P1200A mainframe is housed in a 3 rack unit high, 19″ rack mount enclosure. The mainframe incorporates power supplies for the controllers and mainframe electronics, two power amplifiers, softstart, monitoring and protection circuits with the associated indicators and all connectors. All functions can be remotely interrogated and altered via the d&b Remote Interface Bridge (RIB). Used with d&b C or E-Series loudspeakers, the mainframe can be fitted with either one loudspeaker controller module plus the mono option, or two loudspeaker controller modules. The two channel power amplifier in the P1200A mainframe is a low feedback, low distortion design, fully protected from damage by overheating or connection to faulty or inappropriate loads, and it exhibits good stability into reactive loads along with excellent handling of fast rise-time signals and signal overload conditions. The P1200A is also available as a dual voltage (115 V / 230 V) autosensing version.
Mainframe with two power amplifiers, each rated 600 W into 4 Ohms, fitted with appropriate controllers1
|Dimensions mm (H x W x D)||3 RU x 19″ x 353|
|Dimensions inch (H x W x D)||3 RU x19x 13.9|
- maximum output power, THD + N < 0,1%
Out of stock