Sanyo PLC-XT16 XGA Projector – Needs New Lamp – Powers up OK

£100.00 £40.83 + VAT


A well used Sanyo PLC-XT16 XGA Projector, powers up fine and the lamp strikes ok however the lamp light is on which means its due for replacement – Remote control is not included as I don’t have it, manual is included, Fitted lens is 1.65-2.15:1

Resolution XGA (1024 x 768)
Brightness (typical) 3500/2700 ANSI Lumens – PLC-XT16/XT11
Uniformity 90% LCD Panel System 1.0” TFT Poly w/Micro Lens x 3 (XT11 w/o Micro Lens)
Number of Pixels 2,359,296 (786,432 x 3)
Contrast Ratio 800:1 / 700:1 – PLC-XT16/XT11
Projection Image (diagonal) 30”-300”
Aspect Ratio 4:3
Throw Distance 3.9’-32.8’
Zoom/Focus Powered (1:1.3 zoom)
Up/Down Ratio 10:0 – 1:1
Digital Keystone Correction Vert. + 40°/-20°, Horiz. +/- 10° Projection System
Polarized Beam Splitter optical system
Projection Lens F1.7-2.1 / f1.34”-1.73”
Lens Throw Ratio 1.62-2.12:1
Projection Lamp 250W UHP
Scanning Frequency H 15-100kHz; V 50-100Hz (auto sense/select)
Dot Clock 140 MHz
Computer Compatibility SXGA, XGA, SVGA, VGA
Sound Output Two-piece stereo 2W +2W
Voltage 100-240V AC; 50/60/Hz (auto sense/select)
BTU Rating 1194 dB Rating 31 dBA (Eco mode)
Power Consumption 350W
Dimensions (WxHxD) 11.8” x6.3”x16.6” Net Weight 17.2 lbs.
User Maintenance Clean air filters, replace lamp assembly
Computer Input Terminal 1 RGB (D-Sub 15 x 1) • Audio (stereo mini jack x 1)
Computer Input Terminal 2 RGB (DVI-I x 1) •Audio (stereo mini jack x 1)
Video Input Terminal Composite (RCA) • S-Video (mini DIN4) • Component Y,Pb/Cb,Pr/Cr (RCA x 3) • Stereo Audio (RCA x 2)
Additional Input Terminals USB (Type B), Control (Mini Din 8-pin) Output Terminals Monitor Out (D-Sub 15 x 1) • Audio (stereo mini-jack)

In stock