Zero88 Alphapack 2 DMX & Analogue 3 Channel dimmer

£82.50 + VAT

An ex-hire Zero88 Alphapack 2 in pretty good condition (a few light scratches and a couple of small dents to the casing)

Please note the DMX input is intermittent – we suspect its a dry joint on the PCB – Manual control from the faders works as it should – Fader caps are missing otherwise all OK – Fitted with 13A plugtop

The Zero 88 Alpha Pack 2 is a 3 channel power controller capable of driving up to 6.3 Amps of lighting control per channel. The total current consumption of the Alpha Pack 2 is factory set to a limit of 10, 13 or 16 Amps depending on the version. The loads may be resistive or inductive and include tungsten, transformer driven low voltage and quartz halogen. Some highly inductive loads such as neon will require a ballast load of at least 100 Watts.

Input Signal Connectors
The Alpha Pack 2 features both analogue 0 to + 10V and DMX 512 Control.

Analogue
The input signal connector is via an 8 pin ring locking din normally providing 6 channels of control.

DMX512
The input connector is via a 5 pin male XLR with loop-through on a 5 pin female XLR.

Electrical
The Alpha Pack 2 is designed to operate on 200 – 260V single phase AC supply at frequencies of 50 or 60Hz (factory set).
The Alpha Pack 2 may not operate satisfactorily outside these conditions.
Power Input Via fixed 3m cable Max Current Limited to 10/13/16A (+/- 1.5A)
Load per channel 0.2A Min; 6.3A Max Max.
load per channel 1.44kW @ 230V No
Load consumption 6W
Input signals 0 to + 10V Analogue / DMX 512 – 1990
15A Outlet Sockets

Out of stock